Sunday, 31 July 2016

How do I make the taskbar smaller? Or larger?

Description:




I'll assume that "strip", as you call it, is the Windows Taskbar.
Most folks don't realize that it's really just a special window, of sorts. And as a window you can resize it and even move it.
Sometimes people are surprised when that happens by accident.
I'll use Windows XP for my example here, but the instructions apply to Vista and 7 as well.

Am I Locked or Not?

Have a look at these two task bars:
Windows XP Taskbar - Unlocked
Windows XP Taskbar - Locked
The difference is slight, but important. The upper taskbar is unlocked. You can tell because dividers between the taskbar sections are present, and the top of the taskbar is a little thicker:
Windows XP Taskbar - Signs that your taskbar is unlocked
The difference is simple: when locked you can't make changes to the taskbar layout, size or position. So, our first step is to unlock it:
Right clicking on the taskbar
Right click on an empty area of the taskbar and you'll get the pop-up menu you see above. Click on Lock the Taskbar to make sure it's unchecked.

Size Matters

Resizing the taskbar is now pretty much like any other window, except that the resize will happen in steps.
Hover your mouse over the top edge of the taskbar - the edge that was added when you unlocked it:
Hovering over the edge, the mouse pointer turns into a size arror
As you can see the mouse pointer has turned into a double arrow, indicating that what's underneath is resizeable.
Left click the mouse and hold the mouse button down. Drag the mouse up, and the taskbar will, once your mouse reaches high enough, jump to double the size:
Taskbar enlarged to twice the height
You can go even larger if you like.
And of course the reverse it also true: if your task bar is too high you can make is smaller as well. In fact, you can make it so small as to be nearly unseen:
Taskbar reduced to zero lines.
You can hover over what's visible if you like and resize the task bar up to its normal size.

Location, Location, Location

We normally think about the taskbar being along the bottom - but it doesn't have to be so. Particularly on wide screens you might prefer to have it on the left:
Taskbar on the left
Or the right, or the top. Just click and hold on any empty area in the taskbar while it's unlocked, and drag it to the side of the screen you'd like it to be on.

Lock'er Down

Finally, when you have the taskbar where you want it, and the size you want it, be sure to right click on it and make sure that Lock the taskbar is checked.
Based on what I hear it's fairly common that the taskbar ends up getting unexpectedly resized or moved. Locking the taskbar simply prevents that from happening.






Thursday, 28 July 2016

5 Free Windows Programs To Monitor Your Internet Usage

Description:




1. NetWorx

Once you install NetWorx, it will track all your Internet usage with an icon on the taskbar. You can click and launch the program to view usage graphs of each day. What’s good about NetWorx is the ability to set a daily, weekly or monthly quota to track uploads or downloads or both. You can also set the on/off peak usage that some internet providers have and it’ll warn you if you’re about to reach the limit.


2. BitMeter 2

This program comes with a desktop widget meter graph of your download and upload speeds. Similar to NetWorx, you can add a quota limit — in the case of BitMeter 2, it is named ISP Restrictions. Once set, it’ll tell you how many days and bandwidth you can use before reaching your limit. You can also view your usage stats that can be sorted by hours, days, and months.

3. NetSpeedMonitor

This program permanently sits on your taskbar showing upload and download speeds. To enable this, right click on your taskbar and under Toolbars click on NetSpeedMonitor. Apart from showing connection speeds, it can track your daily usage. You can see track your daily or monthly usage, and also see what programs are connected to the internet. Unlike the other programs though, there is no quota reminder.


4. Cucusoft Net Guard

This program has a very clean user interface that is easy to understand. Upon installing it, you’ll have to provide an email address to register for a free product code. After that, you can begin tracking your internet usage and even see what programs are connected to the internet. It also allows you to set your monthly quota with reminders sent to you as you near the limit.

5. ISP Monitor

ISP Monitor is a lightweight program to easily track your daily or monthly internet usages. You’ll have to set it up first by changing the adapter settings under Settings > Traffic Monitor > Adapter to choose between a wired or Wi-Fi connection. Unlike the previous programs, you cannot set a quota reminder. It has easy-to-read logs where you can instantly see your daily upload and download usage.
ISP Monitor







How To Make A Portable Windows 10_8.1_7_XP USB PenDrive

Description:



Wouldn’t it be cool to have a version of Windows that you can carry around in your pocket and use anywhere? Well, it’s possible and you don’t need to spend any extra money or have an Enterprise version of Windows. Here’s how to do it.
Note: You can also use WinToUSB to create a bootable version of Windows 7, Windows 10 Technical Preview, and Server 2008 R2 or 2012 R2. For best results I recommend using Windows 8 since it’s more friendly to being portable than Windows 7. Also note that this is quite different than installing Windows from a flash drive.
Windows 8 Enterprise edition has a feature called Windows To Go that allows you to install a portable version of Windows on a certified flash drive. However, most of us aren’t running running the Enterprise version of Windows, let alone able to find a “Windows certified” flash drive for it.

Here’s What You’ll Need

  • A Windows 7 or higher ISO image
  • 32GB USB 2.0 or 3.0 Flash Drive — USB 3.0 will perform faster and you can also use a USB external hard drive for a faster experience via 2.0.
  • WinToUSB (Free)

Create a Portable Version of Windows 8

Start by installing WinToUSB and follow the installation wizard and accepting the default settings. There is NO weird toolbar or other crapware that the installer tries to sneak on your computer.
Then launch WinToUSB and the first thing it will do is ask you to find your ISO (or DVD) version of Windows. Then select the version of the OS you want to use.
1find ISO
Then it will need to format your drive, there you can select the default which is MBR partition scheme and click OK.
sshot-3
Next, select your drive and select the system and boot partition. In most cases, on a freshly non-partitioned drive, you can just choose the default as show in the screenshot below.
sshot-1
Now get your favorite mobile game cued up on your smartphone because the installation is going to take an hour at least, but everyone’s mileage will vary depending on the speed of their hardware.
sshot-2
That’s all there is to it! Now you can take your USB flash or hard drive and run the portable installation on whatever computer you want.
To do it, you’ll need to plug the drive in, restart he computer you’re using, and boot to the USB drive. The first time it runs it will install drivers and take a bit of time to boot, and then set it up like you would a new install of Windows 8.x.
Give it a try and let us know how it works for you in the comments below.










Click below button to download WinToUSB




Password: rawat

Win Utilities Professional 11.31 with Key




Wednesday, 27 July 2016

How to make Multiboot ISO USB by XBoot

Description:



XBOOT is yet another neat little Multiboot ISO USB Creator. It is a Windows based application that can be used to create a Live Multiboot USB or even a Multiboot ISO file that can then be burnt to a CD/DVD. XBOOT supports many Linux Distributions and Utilities, and allows you to use your choice of a Grub or Syslinux bootloader. Also included is a built in QEMU emulator (enabling you to boot an ISO from within Windows).



XBOOT – Multiboot ISO/USB Creator
Authors Website: http://sites.google.com/site/shamurxboot/

Usage Example: Creating a Live Multiboot USB with XBOOT:
  1. Download, extract and run the latest version of XBOOT
  2. (1) Drag and drop some ISOs into the XBOOT window (2) Select Create USB  XBOOT - Drag and Drop ISOs - Create USB
  3. (3) Select your USB Drive from the Droplist (4) Select a Bootloader to use (5) Click OK to begin creation XBOOT - Select USB Drive - Bootloader - Create
A copy notification window appears to keep you informed of the progress. Once the process is complete, you should have a Bootable Multiboot USB Flash Drive with your ISO selections installed.



XBOOT is Working





Click below button to download XBootv1.0beta14



Password: rawat

Win Utilities Professional 11.31 with Key





Tuesday, 26 July 2016

How to Make USB Storage Device Read Only (Usb Write Protect)

Description:





USB storage devices are one of the modes which offers fast way for backing up data and transferring it from one computer to another device. In today’s time virus and malware attacks are rising so much that USB devices are becoming highly prone to these attacks and creating a big threat to the overall computer system. Moreover, in the corporate sector so many employees sharing the same computer use the USB storage devices for moving data around. The risk of getting data lost or stolen away is also increased to a great extent. The only idea to prevent all these issues is to make USB storage devices read only.

Method-1

Making USB Read Only through My Computer with Admin Privileges

Following are the steps through which a USB can be made Read Only.
Step 1:
Login with the administrator account as only administrator account has the privileges to make the USB device Read Only.
Step 2:
Connect the USB device in the USB port on the side of the laptop. In case of desktops connect it in the front or at the back USB port.
Step 3:
Click Start and double click My Computer icon. My Computer will open with available disk drives.
Step 4:
As the USB device is plugged, right-click the USB drive and select Properties.
Step 5:
Click Security tab and choose Edit option.
Step 6:
Locate the section named Write Attributes and click inside the checkbox next to Read Only option.
Step 7:
Click Apply or OK button placed at the bottom of the Properties window; all of the changes will be saved. Once done the USB drive is set as Read Only.

Method- 2

Making USB Read Only through Registry

Following are the steps to make USB drive as Read Only through Registry Directory.

How to Make USB Storage Device Read Only

Step 1:
Click Start and select Run and then type regedit. The registry window is displayed.
Step 2:
Once the registry is displayed, follow this sequence.
Click HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\
Step 3:
Search the sub-directory under Control\ to check if a key named StorageDevicePolicies does exists.
If the key does not exist then create a new one by placing a right-click on Control\ directory. A
Dropdown menu will be displayed. Choose New -> Key.
Step 4:
Check for the entry as WriteProtect. If the entry is absent then, make a right-click on the right window and select New eventually followed by DWORD.There are 2 important values: 0 and 1.
O = write processes and 1 = block the access.
Write the value as 1.
Step 5:
Once done, close the registry and restart the system for changes to take effect. After the system is restarted do a login; insert the USB device into USB drive. The access level will be set as read only.



Click below button to download Usb Write Protect



Password: rawat

Win Utilities Professional 11.31 with Key